> 1)It Takes three Packets to start a TCP session, how many packet are used
to
> close it
One AFAIK. With a Reset flag.
> 2)To enter the setup mode on a router with no configuration you must type?
> What command?
setup
> 3)How do you list the current IPX server in the network on a cisco router
show ipx servers - to get the various sap servers.
> 4)If u want to bridge a protocol out a routed interface you can use?
> A IBM spanning tree
> B)Intergrated routing and bridging
> C)SRB
> D)TB
> E)SR/TLB
Integrated routing and bridging. The clue is that it is a routing
interface, and you want to bridge through it.
> 5)Ethernet network can be considered as congested at ......% utilization?
Every company has a different standard. I've commonly heard 60% and 75%,
one was Cisco's I think it was 75%.
> 6)Which are true about Full Duplex
> a)can be used between hubs
> b)can be used between switches
> c)can be used between a switch and a router
> d)can be used among Ethernet station
can be used between switches, a switch and router, and Ethernet stations. A
hub doesn't use it unless it's a "switching" hub. Kind of a misnomer.
> 7)Which of the following describe frame filtering
>
> a)Examines info about a frame based on user defined offset
> b)Uses a frame filtering table
> c)High level administrative control
> d)Is similar in function to packet filtering in a router
dunno, I would problably say d. need more info.
> 8)An Internal IPX number is required by what servers and protocol
> a)IPX RIP router
> b)NLSP capable device
> c)IPX server
> d)NSLP server
> e) all
I'd guess E. Haven't done a whole bunch of IPX or NLSP
> 9)which layer of OSI provide synchronization between address and name
> database?
I believe Cisco defines DNS at the application layer. However I have seen
it defined at the session layer.
> 10)When subnet and addressing is applied in numerical order this is known
> as?
??? huh?
> 11)To enable terminal editing, what is the min privilege level?
not sure, never had to turn it on (or off), try it for yourself
> 12)What command to disable CDP broadcast on a specific interface, what
> commnad ? what mode?
conf t ; int e0 ; no cdp enable
no cdp run is used to turn it off globally
> 13) how many segment to setup a TCP connection>?
3 - SYN ; SYN/ACK ; ACK
> 14) how many ip address can be assigned against a particular host using
the
> ip host command
not sure, never hit the limit, usually use a DNS Server
> 15) TCP/IP connectivity can be checked using ?
> a)ping
> b)trace
> c)telnet
ping of coure, trace is usually used as a backup to ping, and telnet tests
the whole stack.
> 16)what command to check the periodic update of RIP>?
Don't remember, never used rip - (show ip rip ?)
> 17)What is not a valid metric for IGRP
> a)Bandwidth
> b)Delay
> c)Reliabity
> d)loading
loading is not used.
Kevin L. Kultgen
MCSE+I, MCDBA, CCNA, A+, Network+, i-Net+/CIW
IRIS Systems Inc, MCSP
Calgary, Alberta
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
