2500 series routers are fine, I just bought two for my home lab. They're
cheap (in terms of Cisco hardware) and easy to find, especially on ebay.
2600's can get expensive. The main thing to remember is: get IP enterprise
IOS, and make sure the routers you get have the interfaces you want. If you
do that, you can't go wrong. My routers use 11.3 and 12.0, try to stick
with 11.2 or 11.3.
Richard Holland
CCNP,MCSE
----- Original Message -----
From: "James Kavenaugh" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, June 10, 2000 10:30 PM
Subject: Equipment
> Hi,
>
> I have a question about equipment. I just recieved my copy of routersim in
> the mail. Still trying to figure out what kind of shoddy routers it
actually
> simulates.
> Anyway I was going to buy the real equipment anyway, pick up a couple
> 2501's. A co-worker had said to get the 2600 series instead because it is
> newer and would be easier to sell later on. Personally I'm not to worried
> about loosing $$ because I get lots of enjoyment out of this sort of
thing.
> Anyway he had also told me not to buy routersim so I'm wondering if he's
> right about the 2600's also. So I'm asking the list for advice on this.
> Thanks!
> James
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
