Show isdn status
This will show you something like:
Austin-R2#sho isdn stat
The current ISDN Switchtype = basic-ni1
ISDN BRI0 interface
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 72, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 81, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
No Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
Total Allocated ISDN CCBs = 0
Austin-R2#
The layer 1 entry shows whether you are connected to the ISDN line. You can
also check your layer two and three status.
Jeff Odell
CCNA CCDA
Network Specialist
949-453-4377
800-739-5837 pager
949-500-3184 cell phone
-----Original Message-----
From: Jeff Turner [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 16, 2000 8:26 AM
To: [EMAIL PROTECTED]
Subject: ISDN
Hello,
Is there a way to verify that a remote site has there isdn plugged in to
the wall. A sh controllers s 0 would verify that a cable is plugged in,
but I can't tell from a sh controllers bri 0, or I don't know what to look
for. I'd like to get away from having to contact the site to verify that
it is plugged in. If anyone can tell me what to look for in a sh
controllers or has another way I would greatly appreciate it.
Thanks in advance,
Jeff
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
