Hi Peter,
Looking at the show command, there is no layer 3 call. If your BRI interface gets assigned an IP address by the called router, then you won't be able to pin the BRI IP address until an ISDN call is made (and IP assigned).
Cheers
Jeff
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Peter Gray
Sent: Saturday, September 09, 2000 4:58 AM
To: [EMAIL PROTECTED]
Subject: ISDN
I am having problem with ISDN connection. Even though I see active Layer 1 &
Layer 2status I am unable to ping my local ISDN interface.
Router#sh isdn stat
Global ISDN Switchtype = basic-ni
ISDN BRI0/0 interface
dsl 0, interface ISDN Switchtype = basic-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 109, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 111, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Spid Status:
TEI 109, ces = 1, state = 8(established)
spid1 configured, no LDN, spid1 sent, spid1 valid
Endpoint ID Info: epsf = 0, usid = 70, tid = 0
TEI 111, ces = 2, state = 8(established)
spid2 configured, no LDN, spid2 sent, spid2 valid
Endpoint ID Info: epsf = 0, usid = 71, tid = 0
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
Total Allocated ISDN CCBs = 0
Is this any carrier realted problem? What else can I do to troubleshoot
this.
Thanks...
Peter
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associate-Announcement.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
