Hi, Here a a couple of thoughts. (1) What do you have the dialer-load threshold set to. It may never get enough traffic. Setting it to 1 will nail them up. (2) Does the remote end have the B channels available. Otfen we get clients that set up extra B channels to get more bandwidth. We are not always informed therefore the primary rate they are dialing into is full no spare B channels and no come up the clients extra ports. Teunis Hobart, Tasmania Australia On Thursday, December 28, 2000 at 10:55:39 AM, William Harrison wrote: > Hi guys, > > My brain is busted. So any help would be great!! > > Two Bri lines > Cisco 2610 with 4 bri U > > Problem the router will not bring up second bri line. It does bring second > b1 channel with statement load threshold. However can not bring up other > two b channels. I know a config would be nice, I will post soon. > > Thanks for the help > Bill Harrison > CCNA MCT MCSE > > _________________________________ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > -- www.tasmail.com _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
