The way you have it setup means that 2 and 3 floor won't be able to talk to
eachother, but the 1st floor will be able to talk to both of the other
floors, 2nd and 3rd floor will be able to talk to some hosts on the 1st
floor, plus there is a chance of overlapping addresses if your not careful.
If your goal is have all the floors to talk to eachother, a better way to
subnet it would be:
1st - 10.150.1.0 255.255.0.0
2nd - 10.150.2.0 255.255.0.0
3rd - 10.150.3.0 255.255.0.0
This way all floors are in the same subnet therefore they can all see each
other.
Hope that helps
Russ..
""SH Wesson"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...> If on one floor I use
10.150.0.0 255.255.0.0 and on the remaining 2 floors I
> use 10.150.100.0 255.255.255.0 and 10..150.102.0 255.255.255.0, will this
> work in terms of all three networks being able to communicate with each
> other. Will there be any problems, etc. Can someone help me reason this
> out. Thanks.
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
