Hi there
Here is my shot in the dark on this one .
First configure yor aux port , I think its line 0
so...
conf t
line aux 0
speed 38500
modem inout ( so you can call in & out)
transport input all (so it'll take anything , but change it to your fancy
)
transport preferred telnet (so if you telnet you dont have to wait)
autoselct ppp
modem autoconfigure type usr_courier
flowcontrol hardware
exec-timeout 0 0
exec
logical setup
interface async 1 (uax 0 === async 1)
ip unnumbered ethernet 0
ip tcp header-compression passive
encap ppp
async default ip address x.x.x.x (keep this address in the same subnet as
your ethernet 0)
async mode interactive
I got this at www.cisco.com/warp/701/6.html
It explains it really well !
Hope it helps
Cheers
Olden
-----Original Message-----
From: Atef Rostom [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 28, 2000 12:16 PM
To: [EMAIL PROTECTED]
Subject: Analog Dial Backup
Hi All,
I am trying to configure a 1720 to use the Aux port as a backup for the
serial port.
I want it to dial using a USRobotics Courier modem.
Please tell me if you tried this before.
Thanks, Atef
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
