To set your ip address dynamically when dialing into an ISP
use the command: ip address negotiated.
You should be able to find what you are looking for at this URL:
White Paper on Easy IP
http://www.cisco.com/warp/public/cc/pd/iosw/ioft/ionetn/tech/ezip1_wp.htm
If that isn't enough, search the Cisco web site for Easy IP or
ip address negotiated.
HTH,
AQ
At 03:03 PM 6/28/2000, News Cisco wrote:
>this will definitely work, but I had some problems dialing into my ISP &
>getting assigned an IP address dynamicaly, any hints ?
>'Bliss'
>
>
>Olden Pieterse <[EMAIL PROTECTED]> wrote in message
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi there
> > Here is my shot in the dark on this one .
> > First configure yor aux port , I think its line 0
> > so...
> > conf t
> > line aux 0
> > speed 38500
> > modem inout ( so you can call in & out)
> > transport input all (so it'll take anything , but change it to your
>fancy
> > )
> > transport preferred telnet (so if you telnet you dont have to wait)
> > autoselct ppp
> > modem autoconfigure type usr_courier
> > flowcontrol hardware
> > exec-timeout 0 0
> > exec
> >
> > logical setup
> > interface async 1 (uax 0 === async 1)
> > ip unnumbered ethernet 0
> > ip tcp header-compression passive
> > encap ppp
> > async default ip address x.x.x.x (keep this address in the same subnet as
> > your ethernet 0)
> > async mode interactive
> >
> > I got this at www.cisco.com/warp/701/6.html
> >
> > It explains it really well !
> > Hope it helps
> >
> > Cheers
> > Olden
> >
> >
> > -----Original Message-----
> > From: Atef Rostom [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, June 28, 2000 12:16 PM
> > To: [EMAIL PROTECTED]
> > Subject: Analog Dial Backup
> >
> >
> > Hi All,
> >
> > I am trying to configure a 1720 to use the Aux port as a backup for the
> > serial port.
> >
> > I want it to dial using a USRobotics Courier modem.
> >
> > Please tell me if you tried this before.
> >
> > Thanks, Atef
> >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > ---
>
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
*******************************
Adam Quiggle
Sr. Network Engineer
BP-Amoco/MCI Worldcom
CCNA, MCNE, MCSE
[EMAIL PROTECTED]
********************************
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
