I've had problems with the ip address negotiated setup before...although
with ISDN. I could make the connection but my routing tables wouldn't
update (EIGRP). You can usually pay the ISP a few dollars per month extra
and get them to assign a static IP to your account but I haven't tried it
with that exact scenario.
Daniel
-----Original Message-----
From: News Cisco
To: [EMAIL PROTECTED]
Sent: 6/29/00 2:56 PM
Subject: Re: Analog Dial Backup
i've tried that....
doesnt seem to work,,,!
"Tan Choh Koon" <[EMAIL PROTECTED]> wrote in message
008a01bfe173$27a9eec0$[EMAIL PROTECTED]">news:008a01bfe173$27a9eec0$[EMAIL PROTECTED]...
> Sorry it should be , ip address negotiated.
>
>
>
> ----- Original Message -----
> From: Tan Choh Koon <[EMAIL PROTECTED]>
> To: Michael Fountain <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>
> Sent: Thursday, June 29, 2000 9:25 AM
> Subject: Re: Analog Dial Backup
>
>
> > Hi,
> >
> > Use this command :
> >
> > ip address negotiable
> >
> >
> > ----- Original Message -----
> > From: Michael Fountain <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> > Sent: Thursday, June 29, 2000 4:34 AM
> > Subject: Re: Analog Dial Backup
> >
> >
> > > I haven't this yet, but plan to shortly -
> > >
> > > Cisco has something called "easy IP". You should be able to find
some
> > > references to it on their web page. It is also in the IOS Dial
> solutions
> > > book. Basically it looks like you set up the router for NAT, and
then
> > also
> > > to recieve an IP from a DHCP server and then it will NAT into that
> dynamic
> > > address.
> > >
> > > Has anyone worked with this yet?
> > >
> > >
> > > >
> > > >this will definitely work, but I had some problems dialing into
my
ISP
> &
> > > >getting assigned an IP address dynamicaly, any hints ?
> > > >'Bliss'
> > > >
> > > >
> > > >Olden Pieterse <[EMAIL PROTECTED]> wrote in message
> > >
>[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > > > Hi there
> > > > > Here is my shot in the dark on this one .
> > > > > First configure yor aux port , I think its line 0
> > > > > so...
> > > > > conf t
> > > > > line aux 0
> > > > > speed 38500
> > > > > modem inout ( so you can call in & out)
> > > > > transport input all (so it'll take anything , but change it
to
> your
> > > >fancy
> > > > > )
> > > > > transport preferred telnet (so if you telnet you dont have to
wait)
> > > > > autoselct ppp
> > > > > modem autoconfigure type usr_courier
> > > > > flowcontrol hardware
> > > > > exec-timeout 0 0
> > > > > exec
> > > > >
> > > > > logical setup
> > > > > interface async 1 (uax 0 === async 1)
> > > > > ip unnumbered ethernet 0
> > > > > ip tcp header-compression passive
> > > > > encap ppp
> > > > > async default ip address x.x.x.x (keep this address in the
same
> > subnet
> > > >as
> > > > > your ethernet 0)
> > > > > async mode interactive
> > > > >
> > > > > I got this at www.cisco.com/warp/701/6.html
> > > > >
> > > > > It explains it really well !
> > > > > Hope it helps
> > > > >
> > > > > Cheers
> > > > > Olden
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: Atef Rostom [mailto:[EMAIL PROTECTED]]
> > > > > Sent: Wednesday, June 28, 2000 12:16 PM
> > > > > To: [EMAIL PROTECTED]
> > > > > Subject: Analog Dial Backup
> > > > >
> > > > >
> > > > > Hi All,
> > > > >
> > > > > I am trying to configure a 1720 to use the Aux port as a
backup
for
> > the
> > > > > serial port.
> > > > >
> > > > > I want it to dial using a USRobotics Courier modem.
> > > > >
> > > > > Please tell me if you tried this before.
> > > > >
> > > > > Thanks, Atef
> > > > >
> > > > >
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
