There are a better pssibilities than an access-list. You can disable CDP per
Port. Look at the command syntax:
cdp enable
To enable Cisco Discovery Protocol (CDP) on an interface, use the cdp enable
interface configuration command. Use the no form of this command to disable
CDP on an interface.
cdp enable
no cdp enable
cdp run
To enable CDP, use the cdp run global configuration command. Use the no form
of this command to disable CDP.
cdp run
no cdp run
best wishes
Lyko
Aaron Prather <[EMAIL PROTECTED]> schrieb in im Newsbeitrag:
[EMAIL PROTECTED]
> If you can what protocol does it use? UDP? i know its a protocol in
> itself, but can this be done? what port number?
>
> Thanks guys,
>
> Aaron
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
