This could be as simple as setting a default route for you sc0 interface.
Mohammed.
if you go to the msfc (session 15) can you ping the servers?
--
On Thu, 29 Jun 2000 15:30:37 Bartlett, DS1 wrote:
>I have two 6506's with MSFC PFC cards attached to the supervisors. I have
>configured multiple VLAN's on the Switches and a corresponding Interface on
>each MSFC. I also have HSRP running between the two 6500's. I have
>assigned IGRP 1 with all the correct networks listed. I have turned on IP
>routing. One of the VLAN's is called Server Farm, to which the obvious
>occurs, I have attached servers. I have trunking turned on to the 2924
>switch (running Enterprise Code) from each 6500. I have also pruned all
>VLAN's except the Server Farm VLAN from the Trunk.
>
>Problem: I cannot ping from a switch to the server.
>
>This is a pre-production setup and though it is time critical, I am not down
>hard because of it. If someone has great and wonderful suggestions I would
>greatly appreciate them.
>
>Thank You,
>Daryn P. Bartlett
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--== Sent via Deja.com http://www.deja.com/ ==--
Before you buy.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]