Hi
First you have to define VLAN 2.
In the enable mode, (not the config mode!), type the following
Vlan database
Vlan vlan2
Vtp server
Vtp domain domain_name
Apply
Exit
Then continue as specified below
Regards
Geoffrey
----- Original Message -----
From: "Luan Kim" <[EMAIL PROTECTED]>
To: "Sim, CT (Chee Tong)" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Monday, July 03, 2000 12:48 PM
Subject: RE: how to configure VLAN on 2900 switch-how about full duplex an d
spanning tree
> Hi Chee Tong,
> With your current "show run" below, you're only running one vlan1 on your
> catalyst 2924. By default, the catalyst 2924 comes with one VLAN1. By
> adding another VLAN2 in your switch, you can reduce broadcasts on your
> network. Here is an example of placing port fastethernet0/6 on VLAN2:
>
> conf t
> int fastethernet0/2
> switchport access vlan 2
>
>
> And if you want to enable spanning-tree, first do this to see if it's
> already enabled on the switch:
>
> sh span
>
> If it shows that it's "disabled", then you can do this to enable it:
>
> conf t
> spanning
>
> Hope it'll help you.
>
> ********************************************
> Luan T. Kim, MCSE, CCNA *
> Systems/Network Infrastructure Engineer *
> MP3.COM, INC. http://www.mp3.com *
> Phone: 858-623-7341 Cell: 858-382-3055 *
> Fax: 858-623-7400 Email: [EMAIL PROTECTED] *
> ********************************************
>
>
> On Mon, 3 Jul 2000, Sim, CT (Chee Tong) wrote:
>
> >
> > Hi.. Kim! Thank for your info, but I am going to ask you futher , what
is
> > the difference between VLAN1 and VLAN2, pls take a look on the
following
> > configuration file, the VLAN1 (below) it is for every fastethernet
> > interface? what is the syntax to configure spanning tree and full duplex
on
> > the interface.
> >
> > Thank you in advance :)
> > Tong
> >
> >
> >
> > User Access Verification
> >
> > Password:
> > Password:
> > simtest>en
> > Password:
> > simtest#sh conf
> > Using 1315 out of 32768 bytes
> > !
> > version 12.0
> > no service pad
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname simtest
> > !
> > enable secret 5 $1$C8R4$zMASNLTu0DeKZ.gCgcomt.
> > !
> > !
> > !
> > !
> > !
> > !
> > ip subnet-zero
> > !
> > !
> > !
> > interface FastEthernet0/1
> > !
> > interface FastEthernet0/2
> > !
> > interface FastEthernet0/3
> > !
> > interface FastEthernet0/4
> > !
> > interface FastEthernet0/5
> > !
> > interface FastEthernet0/6
> > !
> > interface FastEthernet0/7
> > !
> > interface FastEthernet0/8
> > !
> > interface FastEthernet0/9
> > !
> > interface FastEthernet0/10
> > !
> > interface FastEthernet0/11
> > !
> > interface FastEthernet0/12
> > !
> > interface FastEthernet0/13
> > !
> > interface FastEthernet0/14
> > !
> > interface FastEthernet0/15
> > !
> > interface FastEthernet0/16
> > !
> > interface FastEthernet0/17
> > !
> > interface FastEthernet0/18
> > !
> > interface FastEthernet0/19
> > !
> > interface FastEthernet0/20
> > !
> > interface FastEthernet0/21
> > !
> > interface FastEthernet0/22
> > !
> > interface FastEthernet0/23
> > !
> > interface FastEthernet0/24
> > !
> > interface VLAN1
> > ip address 57.198.165.200 255.255.254.0
> > no ip directed-broadcast
> > no ip route-cache
> > !
> > ip default-gateway 57.198.164.1
> > snmp-server engineID local 000000090200000196F23840
> > snmp-server community private RW
> > snmp-server community public RO
> > snmp-server chassis-id 0x10
> > !
> > line con 0
> > transport input none
> > stopbits 1
> > line vty 0 4
> > password XXXX
> > login
> > line vty 5 15
> > password XXXXXX
> > login
> > !
> > end
> >
> > -----Original Message-----
> > From: Luan Kim [mailto:[EMAIL PROTECTED]]
> > Sent: Monday, July 03, 2000 10:14 AM
> > To: Sim, CT (Chee Tong)
> > Cc: 'John Hardman'; '[EMAIL PROTECTED]'
> > Subject: Re: how to configure VLAN on 2900 switch
> >
> >
> > hi Chee Tong,
> > By default, your cat29xx comes with one vlan(vlan1). For example, if
you
> > want to place your fastethernet0/13 on vlan2, you do this:
> >
> > conf t
> > int fastEthernet 0/13
> > switchport access vlan 2
> >
> > Hope it'll help you.
> >
> > ********************************************
> > Luan T. Kim, MCSE, CCNA *
> > Systems/Network Infrastructure Engineer *
> > MP3.COM, INC. http://www.mp3.com *
> > Phone: 858-623-7341 Cell: 858-382-3055 *
> > Fax: 858-623-7400 Email: [EMAIL PROTECTED] *
> > ********************************************
> >
> >
> > On Mon, 3 Jul 2000, Sim, CT (Chee Tong) wrote:
> >
> > > Dear Friends,
> > >
> > > What is the procedure to configure VLan on 2900 switches, wat command
to
> > > use? If we don't configured VLAN on 2900 switches, will it cause the
> > > slowness in the network
> > >
> > > Chee Tong
> > >
> > >
> > >
> > >
> > >
> > > ==================================================================
> > > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> > > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> > > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> > > de afzender direct te informeren door het bericht te retourneren.
> > > ==================================================================
> > > The information contained in this message may be confidential
> > > and is intended to be exclusively for the addressee. Should you
> > > receive this message unintentionally, please do not use the contents
> > > herein and notify the sender immediately by return e-mail.
> > >
> > >
> > > ==================================================================
> > >
> > > ___________________________________
> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> >
> >
> > ==================================================================
> > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> > de afzender direct te informeren door het bericht te retourneren.
> > ==================================================================
> > The information contained in this message may be confidential
> > and is intended to be exclusively for the addressee. Should you
> > receive this message unintentionally, please do not use the contents
> > herein and notify the sender immediately by return e-mail.
> >
> >
> > ==================================================================
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
