But after configuring second VLAN, my different can't talk to each other.
what colud be the problem and how i can solve that.
My net address are 192.168.1.x, 192.168.2.x, 192.168.3.x, 192.168.4.x and
mail Enterprise sw is on 192.168.3.x and one switch for all other net.
Gm
----- Original Message -----
From: A. Geoffrey Cauchi <[EMAIL PROTECTED]>
To: Luan Kim <[EMAIL PROTECTED]>; Sim, CT (Chee Tong)
<[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Monday, July 03, 2000 4:51 PM
Subject: Re: how to configure VLAN on 2900 switch-how about full duplex an d
spanning tree
> Hi
>
> First you have to define VLAN 2.
>
>
> In the enable mode, (not the config mode!), type the following
>
> Vlan database
> Vlan vlan2
> Vtp server
> Vtp domain domain_name
> Apply
> Exit
>
> Then continue as specified below
>
> Regards
> Geoffrey
>
> ----- Original Message -----
> From: "Luan Kim" <[EMAIL PROTECTED]>
> To: "Sim, CT (Chee Tong)" <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Monday, July 03, 2000 12:48 PM
> Subject: RE: how to configure VLAN on 2900 switch-how about full duplex an
d
> spanning tree
>
>
> > Hi Chee Tong,
> > With your current "show run" below, you're only running one vlan1 on
your
> > catalyst 2924. By default, the catalyst 2924 comes with one VLAN1. By
> > adding another VLAN2 in your switch, you can reduce broadcasts on your
> > network. Here is an example of placing port fastethernet0/6 on VLAN2:
> >
> > conf t
> > int fastethernet0/2
> > switchport access vlan 2
> >
> >
> > And if you want to enable spanning-tree, first do this to see if it's
> > already enabled on the switch:
> >
> > sh span
> >
> > If it shows that it's "disabled", then you can do this to enable it:
> >
> > conf t
> > spanning
> >
> > Hope it'll help you.
> >
> > ********************************************
> > Luan T. Kim, MCSE, CCNA *
> > Systems/Network Infrastructure Engineer *
> > MP3.COM, INC. http://www.mp3.com *
> > Phone: 858-623-7341 Cell: 858-382-3055 *
> > Fax: 858-623-7400 Email: [EMAIL PROTECTED] *
> > ********************************************
> >
> >
> > On Mon, 3 Jul 2000, Sim, CT (Chee Tong) wrote:
> >
> > >
> > > Hi.. Kim! Thank for your info, but I am going to ask you futher , what
> is
> > > the difference between VLAN1 and VLAN2, pls take a look on the
> following
> > > configuration file, the VLAN1 (below) it is for every fastethernet
> > > interface? what is the syntax to configure spanning tree and full
duplex
> on
> > > the interface.
> > >
> > > Thank you in advance :)
> > > Tong
> > >
> > >
> > >
> > > User Access Verification
> > >
> > > Password:
> > > Password:
> > > simtest>en
> > > Password:
> > > simtest#sh conf
> > > Using 1315 out of 32768 bytes
> > > !
> > > version 12.0
> > > no service pad
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname simtest
> > > !
> > > enable secret 5 $1$C8R4$zMASNLTu0DeKZ.gCgcomt.
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > ip subnet-zero
> > > !
> > > !
> > > !
> > > interface FastEthernet0/1
> > > !
> > > interface FastEthernet0/2
> > > !
> > > interface FastEthernet0/3
> > > !
> > > interface FastEthernet0/4
> > > !
> > > interface FastEthernet0/5
> > > !
> > > interface FastEthernet0/6
> > > !
> > > interface FastEthernet0/7
> > > !
> > > interface FastEthernet0/8
> > > !
> > > interface FastEthernet0/9
> > > !
> > > interface FastEthernet0/10
> > > !
> > > interface FastEthernet0/11
> > > !
> > > interface FastEthernet0/12
> > > !
> > > interface FastEthernet0/13
> > > !
> > > interface FastEthernet0/14
> > > !
> > > interface FastEthernet0/15
> > > !
> > > interface FastEthernet0/16
> > > !
> > > interface FastEthernet0/17
> > > !
> > > interface FastEthernet0/18
> > > !
> > > interface FastEthernet0/19
> > > !
> > > interface FastEthernet0/20
> > > !
> > > interface FastEthernet0/21
> > > !
> > > interface FastEthernet0/22
> > > !
> > > interface FastEthernet0/23
> > > !
> > > interface FastEthernet0/24
> > > !
> > > interface VLAN1
> > > ip address 57.198.165.200 255.255.254.0
> > > no ip directed-broadcast
> > > no ip route-cache
> > > !
> > > ip default-gateway 57.198.164.1
> > > snmp-server engineID local 000000090200000196F23840
> > > snmp-server community private RW
> > > snmp-server community public RO
> > > snmp-server chassis-id 0x10
> > > !
> > > line con 0
> > > transport input none
> > > stopbits 1
> > > line vty 0 4
> > > password XXXX
> > > login
> > > line vty 5 15
> > > password XXXXXX
> > > login
> > > !
> > > end
> > >
> > > -----Original Message-----
> > > From: Luan Kim [mailto:[EMAIL PROTECTED]]
> > > Sent: Monday, July 03, 2000 10:14 AM
> > > To: Sim, CT (Chee Tong)
> > > Cc: 'John Hardman'; '[EMAIL PROTECTED]'
> > > Subject: Re: how to configure VLAN on 2900 switch
> > >
> > >
> > > hi Chee Tong,
> > > By default, your cat29xx comes with one vlan(vlan1). For example, if
> you
> > > want to place your fastethernet0/13 on vlan2, you do this:
> > >
> > > conf t
> > > int fastEthernet 0/13
> > > switchport access vlan 2
> > >
> > > Hope it'll help you.
> > >
> > > ********************************************
> > > Luan T. Kim, MCSE, CCNA *
> > > Systems/Network Infrastructure Engineer *
> > > MP3.COM, INC. http://www.mp3.com *
> > > Phone: 858-623-7341 Cell: 858-382-3055 *
> > > Fax: 858-623-7400 Email: [EMAIL PROTECTED] *
> > > ********************************************
> > >
> > >
> > > On Mon, 3 Jul 2000, Sim, CT (Chee Tong) wrote:
> > >
> > > > Dear Friends,
> > > >
> > > > What is the procedure to configure VLan on 2900 switches, wat
command
> to
> > > > use? If we don't configured VLAN on 2900 switches, will it cause
the
> > > > slowness in the network
> > > >
> > > > Chee Tong
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ==================================================================
> > > > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> > > > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> > > > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> > > > de afzender direct te informeren door het bericht te retourneren.
> > > > ==================================================================
> > > > The information contained in this message may be confidential
> > > > and is intended to be exclusively for the addressee. Should you
> > > > receive this message unintentionally, please do not use the contents
> > > > herein and notify the sender immediately by return e-mail.
> > > >
> > > >
> > > > ==================================================================
> > > >
> > > > ___________________________________
> > > > UPDATED Posting Guidelines:
http://www.groupstudy.com/list/guide.html
> > > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > > >
> > >
> > >
> > >
> > >
> > > ==================================================================
> > > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> > > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> > > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> > > de afzender direct te informeren door het bericht te retourneren.
> > > ==================================================================
> > > The information contained in this message may be confidential
> > > and is intended to be exclusively for the addressee. Should you
> > > receive this message unintentionally, please do not use the contents
> > > herein and notify the sender immediately by return e-mail.
> > >
> > >
> > > ==================================================================
> > >
> > > ___________________________________
> > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> > ___________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
