Hi.. Kim! Thank for your info, but I am going to ask you futher , what is
the difference between VLAN1 and VLAN2, pls take a look on the following
configuration file, the VLAN1 (below) it is for every fastethernet
interface? what is the syntax to configure spanning tree and full duplex on
the interface.
Thank you in advance :)
Tong
User Access Verification
Password:
Password:
simtest>en
Password:
simtest#sh conf
Using 1315 out of 32768 bytes
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname simtest
!
enable secret 5 $1$C8R4$zMASNLTu0DeKZ.gCgcomt.
!
!
!
!
!
!
ip subnet-zero
!
!
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface VLAN1
ip address 57.198.165.200 255.255.254.0
no ip directed-broadcast
no ip route-cache
!
ip default-gateway 57.198.164.1
snmp-server engineID local 000000090200000196F23840
snmp-server community private RW
snmp-server community public RO
snmp-server chassis-id 0x10
!
line con 0
transport input none
stopbits 1
line vty 0 4
password XXXX
login
line vty 5 15
password XXXXXX
login
!
end
-----Original Message-----
From: Luan Kim [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 03, 2000 10:14 AM
To: Sim, CT (Chee Tong)
Cc: 'John Hardman'; '[EMAIL PROTECTED]'
Subject: Re: how to configure VLAN on 2900 switch
hi Chee Tong,
By default, your cat29xx comes with one vlan(vlan1). For example, if you
want to place your fastethernet0/13 on vlan2, you do this:
conf t
int fastEthernet 0/13
switchport access vlan 2
Hope it'll help you.
********************************************
Luan T. Kim, MCSE, CCNA *
Systems/Network Infrastructure Engineer *
MP3.COM, INC. http://www.mp3.com *
Phone: 858-623-7341 Cell: 858-382-3055 *
Fax: 858-623-7400 Email: [EMAIL PROTECTED] *
********************************************
On Mon, 3 Jul 2000, Sim, CT (Chee Tong) wrote:
> Dear Friends,
>
> What is the procedure to configure VLan on 2900 switches, wat command to
> use? If we don't configured VLAN on 2900 switches, will it cause the
> slowness in the network
>
> Chee Tong
>
>
>
>
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
