At 06:41 PM 7/3/00 +0000, you wrote:
>JEES.....you have been given a load of crap advise......!!!!!!
>
>FIRST lets start at the begininng .....you have 5 pc`s which are connected
>to your switch .....they , i take it are 100 meg cards ...make sure they
>are in HALF DUPLEX....(send and recieve on the same cable) NOT... FULL
>DUPLEX (send and recieve on TWO different CABLES)
>(THE WAY YOU GET 20/200 MEG IS YOU TRUNK (2 THATS 2) CABLES TOGETHER USING
>TWO PORTS....... ANYONE TELLS YOU OTHER WISE IS A FOOL)in my experience
>you should make sure the pc cards are set to this ...
>
>SECOND...are you connecting to your main link at 100 meg.... if your using
>cat 5 cabling and the main router is more than 10 meters away IR-REGARDLES
>of what the switch says ...you wont be getting it...
>
>THIRD...FORGET about spanning tree, trunking and all that crap ...START at
>the beginning (I`M NO CCIE BUT I HAVE BEEN ROUND LONG ENOUGH TO KNOW THAT
>YOU DON`T THROW THE CAR AWAY WHEN A CAM BELT GOES)
>95% of your problems will be simple you just need to start at the
>begining.......all the info you have been given is from PAPER CCNP/A`S
>IF THEY KNEW WHAT THEY WERE TALKING ABOUT YOU WOULD HAVE IT FIXED BY NOW!!!!!
>
>
>mail me more if you want help
>
>steve (IEEE,ITAU commite`s CCNP MCSE PSS ACE SSA Co-contributor to
>Win200,RIP V2 CCSE JSE CLP )
Pretty disrespectful if I do say so myself. Did you spit all over yourself
when you were screaming this email? I had to turn word wrap on so that I
could see all of crap after your name on the same line.
Take it down a notch.
Cheers!
Roman
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
