MRTG can do CPU/Memory. You just need to find the correct MIB and set it up
MRTG. Start looking under 1.3.6.1.4.1.9.local.system.
I believe the CPU mib is around .56-58 under cisco.local.system but I am
doing this from memory so I may be way off. Look in the Cisco doc set or
use snmpwalk.
Paul Borghese
-----Original Message-----
From: Emilia Lambros <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Monday, July 10, 2000 11:44 PM
Subject: RE: Which access-list increase load the most?
>In response to the other part of the question, I know Cricket
>(http://cricket.sourceforge.net/) does CPU/Memory monitoring and I MRTG
does
>load, but I'm not sure about memory .. you'd probably have to check it/play
>with it for a while, but I have seen some pretty weird stuff done with MRTG
>so you never know until you give it a go.
>
>
>
>> > >"K.FUJIWARA" <[EMAIL PROTECTED]> on 26/06/2000
>> > 15:59:31
>> > >
>> > >Please respond to "K.FUJIWARA"
>> > <[EMAIL PROTECTED]>
>> > >
>> > >
>> > >To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
>> > >cc: (bcc: JENNY MCLEOD/NSO/CSDA)
>> > >Subject: Which access-list increase load the most?
>> > >
>> > >
>> > >
>> > >Hi, all.
>> > >
>> > >Though the null interface is the best solution for
>> > load in the ruter
>> > >CPU, which
>> > >extended / standard access-list is the best to
>> > reduce the load?
>> > >Extended one's result may be depends on where it
>> > will be put or the
>> > >case, so where
>> > >should it be configured? Destination?
>> > >If you have some good examples, please show me.
>> > >
>> > >And then, do you know good tools or utility to
>> > monitor the routers
>> > >performance on
>> > >CPU or RAM in real time?
>> > >
>> > >Kazuyo Fujiwara
>> > >MCSE/CCNA
>> > >Japan Kobe
>> > >
>> > >
>> > >
>> > >___________________________________
>> > >UPDATED Posting Guidelines:
>> > http://www.groupstudy.com/list/guide.html
>> > >FAQ, list archives, and subscription info:
>> > http://www.groupstudy.com
>> > >Report misconduct and Nondisclosure violations to
>> > [EMAIL PROTECTED]
>> > >
>> > >
>> > >
>> > >
>> > >___________________________________
>> > >UPDATED Posting Guidelines:
>> > http://www.groupstudy.com/list/guide.html
>> > >FAQ, list archives, and subscription info:
>> > http://www.groupstudy.com
>> > >Report misconduct and Nondisclosure violations to
>> > [EMAIL PROTECTED]
>> >
>> > Tom Holbrook
>> > Network Engineer
>> > Earthlink
>> >
>> > ___________________________________
>> > UPDATED Posting Guidelines:
>> > http://www.groupstudy.com/list/guide.html
>> > FAQ, list archives, and subscription info:
>> > http://www.groupstudy.com
>> > Report misconduct and Nondisclosure violations to
>>[EMAIL PROTECTED]
>>
>>
>>__________________________________________________
>>Do You Yahoo!?
>>Get Yahoo! Mail ñ Free email you can access from anywhere!
>>http://mail.yahoo.com/
>>
>>___________________________________
>>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>>FAQ, list archives, and subscription info: http://www.groupstudy.com
>>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]