We do not have CDP disabled anywhere on our routers, either globally or at
the interface level. I brought up a new PVC today and at the remote side I
could see both PVCs to that router. After a few seconds, though, one of
them disappeared from the "show cdp neighbors" output. No changes were made
to configs at either side, it just did this on it's own. This particular
PVC is terminating at a subinterface on both routers, and other
subinterfaces on the major interfaces at each end still report their cdp
neighbors correctly; the problem is only on this particular subinterface.
I have noticed this in the past with a different PVC, so it's happened at
least twice in our network.
any ideas why it works temporarily and then quits?
TIA,
John Neiberger
_______________________________________________________
Say Bye to Slow Internet!
http://www.home.com/xinbox/signup.html
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
