Bandwidth 64 is correct.
The bandwidth command is given in KBPS, not BPS (like clock rate).
By default, for example, a show interface serial 0 command will display a
bandwidth of 1544.
My two bits,
Joel Studtmann
MCSE, MCP+I
A+, Network+
CCNA
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 11, 2000 21:18
Subject: RE: 801 ISDN ping reply only 48%
> One of the first things I noticed in the config section under Interface
> BRI0, you have
>
> interface BRI0
> bandwidth 64
>
> Replace 64 with 64000....?
>
> Bob Schussler
> Sales Engineer
> Broadwing / Indianapolis
> 317-469-3719
>
>
> -----Original Message-----
> From: Muhammad Faheem [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, July 11, 2000 9:42 AM
> To: cisco@groupstudy. com (E-mail)
> Subject: 801 ISDN ping reply only 48%
>
>
> Hi All
>
> I have connected 2 cisco 801 ISDN routers using 64k link , but when i
ping
> from SITE A to SITE B or viseversa
> it replies
>
>
!.!.!.!..!.!.!.!..!.!.!.!.!..!.!.!.!.!.!.!.!.!.!..!..!.!.!.!...!.!.!...!.!..
> !. with 48% Success rate , can any body tell why its not 100%
> am i missing some thing in configuration , pls check the attached
> configuration files
>
> Thanks in Advance.
> <<Router1.txt>> <<Router2.txt>>
>
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
