Double check the configuration register, where is the router booting from
when it reloads ?
On Mon, 17 Jul 2000, Ref wrote:
> Dear All,
>
> I have 7206 high end router which is configured to be used on an ATM
> network. That means my Serial interface with its sub interfaces are
> mapped to several Frame relay maps.
>
> Lately, I'm facing many Router down time as when the router is running
> at the maximum users capacity, no new connections could be established.
> Even telneting the router is not possible. The consol shows an error
> stating that not enough memory.!!! I'm going to upgrade and increase the
> memory very soon. But the surprise is that when I reload the router or
> power off/on it, I lose all frame relay maps and most of the times I
> need to re-assign those maps from the beginning.
> In fact, when the router starts again, FastEthernet 0/0 is
> administratively down and the serial interface has no encapsulation of
> frame-relay.!!!!
>
> I understand the lack of memory I have in the router, but why I'm losing
> the configuration???
>
> Best regards,
> Ref
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
