Hi!
It is 0x2102. You know the router boots and read the configuration
without any problem. The other interfaces comes up. But this
particular interface will be down until I retype the commands.
Regards
Kiarash
Russ Kreigh wrote:
>
> Whats the config-register?
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Kiarash Bodouhi
> Sent: Monday, July 17, 2000 4:05 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Losing configurations
>
> Hi,
>
> Please check your start up config to see whether your changes to
> the interface has been saved without any problem. I have the same
> problem with a 3640 voice gateway which the virtual security
> interface does not come up until I manually retype the commands.
> But the config in NVRAM is Ok.
>
> Regards
> Kiarash
> > Ref wrote:
> >
> > Dear All,
> >
> > I have 7206 high end router which is configured to be used on an ATM
> > network. That means my Serial interface with its sub interfaces are
> > mapped to several Frame relay maps.
> >
> > Lately, I'm facing many Router down time as when the router is running at
> > the maximum users capacity, no new connections could be established. Even
> > telneting the router is not possible. The consol shows an error stating
> > that not enough memory.!!! I'm going to upgrade and increase the memory
> > very soon. But the surprise is that when I reload the router or power
> > off/on it, I lose all frame relay maps and most of the times I need to
> > re-assign those maps from the beginning.
> > In fact, when the router starts again, FastEthernet 0/0 is
> > administratively down and the serial interface has no encapsulation of
> > frame-relay.!!!!
> >
> > I understand the lack of memory I have in the router, but why I'm losing
> > the configuration???
> >
> > Best regards,
> > Ref
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
