You show us yoru dial-group 1 but have not shown us the dialer-list and
possibly access-list it references.
On Tue, 18 Jul 2000, Evan You wrote:
> Hey all,
>
> I have two routers in OSPF Area 0 that have ISDN backup connections from one
> to the other.
>
> The ISDN config is working great. When the primary FR link goes down, the
> ISDN kicks in instantly and it dies when the primary link goes back up. My
> dilemma is that even though the primary FR link is up, the ISDN link goes up
> every few minutes.
>
> I've configured EIGRP DDR scenarios and had to use Access-list to control
> EIGRP traffic over the BRI interface. Is it the same with OSPF? What can be
> causing the ISDN BRI to go up every few minutes?
>
> The routers are currently running:
> OSPF
> IP
> Frame Relay
> And nothing else!
>
> interface BRI0
> ip address 212.1.22.34 255.255.255.240
> encapsulation ppp
> ip ospf cost 200
> ip ospf demand-circuit
> bandwidth 64000
> isdn spid1 xxxxxxxxx xxxxx
> dialer idle-timeout 180
> dialer map ip 212.1.22.33 name R2 broadcast xxxxxxx
> dialer hold-queue 75
> dialer-group 1
> no cdp enable
> ppp authentication chap
>
>
> Thanks,
>
> Evan You - CCNA
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------------
Brian Feeny, CCNA [EMAIL PROTECTED]
318-222-2638 x 109 http://www.shreve.net/~signal
Network Administrator ShreveNet Inc. (ASN 11881)
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
