Make sure you are in privileged/global configuration mode.
You may be in the user excec/mode where where privileged commands
are not recognized. If this is not the case, then you need
to get the right IOS version.
------Original Message------
From: "Anderson, Stuart" <[EMAIL PROTECTED]>
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
Sent: July 18, 2000 8:01:48 AM GMT
Subject: Trouble with 2501
I've been set a test to get a 2501 to route IPX traffic. All I can find
from several texts is entering the command:
ipx routing at the configure terminal
The 2501 doesn't recognise this command and there is no mention of ipx in
the help in the exec.
Can this router handle ipx and if it can, how?
Stuart
Jorge Rodriguez /CCNA
Network Analyst
R&S Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-989-8634 Evenings
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
http://www.netlearnings.n3.net/
.............................................................
voted #1 search engine! http://www.iwon.com why wouldn't you?
.............................................................
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
