Bridge is a layer 2 device. They will not show up as a "hop" when doing a
traceroute, hence they can't be ping'ed. Same with ATM switches, or LAN
switches like a Cat5.
HTH,
Rog
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Sameh Badros
> Sent: Wednesday, July 19, 2000 2:19 PM
> To: [EMAIL PROTECTED]
> Subject:
>
>
>
>
>
> I am using Bridging between 2 routers connected through T1 but I am unable
> to ping from either side..any ideas ?
>
>
> Thanks in advance,
>
> Sameh
>
>
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
