If the interface or line protocol is down, check all
cabling and connections. Troubleshoot the hardware and
the media.
larry
--- Hans Stout <[EMAIL PROTECTED]> wrote:
> Hi Larry,
>
> thanks for your answer.
> What exactly do you mean by enabling the interface
> first ?
> My concern is that I do not see any lit LEDs on the
> interface. Can you tell
> me what a status of standby/down means ? How can I
> get the interface in
> up/up (spoofing) status ? Also, what do the carrier
> transitions mean ?
> I include the output from the sh int command:
>
> Ener_Erkath#sh int bri0/0
> BRI0/0 is standby mode, line protocol is down
> Hardware is PQUICC BRI
> Internet address is 10.90.1.70/30
> MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely
> 255/255, load 1/255
> Encapsulation PPP, loopback not set
> Last input never, output never, output hang never
> Last clearing of "show interface" counters never
> Input queue: 0/75/0 (size/max/drops); Total output
> drops: 0
> Queueing strategy: weighted fair
> Output queue: 0/1000/64/0 (size/max
> total/threshold/drops)
> Conversations 0/0/256 (active/max active/max
> total)
> Reserved Conversations 0/0 (allocated/max
> allocated)
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 0 packets input, 0 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0
> throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0
> ignored, 0 abort
> 21139976 packets output, 2239721261 bytes, 0
> underruns
> 0 output errors, 0 collisions, 3 interface
> resets
> 0 output buffer failures, 0 output buffers
> swapped out
> 140 carrier transitions
>
>
> >From: LARRY OSEI-KWAKU <[EMAIL PROTECTED]>
> >Reply-To: LARRY OSEI-KWAKU <[EMAIL PROTECTED]>
> >To: Hans Stout <[EMAIL PROTECTED]>,
> [EMAIL PROTECTED]
> >Subject: Re: ISDN interface problem
> >Date: Fri, 21 Jul 2000 05:10:29 -0700 (PDT)
> >
> >I think you will need to enable the interface first
> >before you can set the switch type.
> >
> >Larry Osei
> >Lodnon
> >Uk
> >--- Hans Stout <[EMAIL PROTECTED]> wrote:
> > > Hi there colleagues,
> > >
> > > I have a problem with my ISDN interface on a
> Cisco
> > > 2610 router. I just had a
> > > Telekom engineer at the site verify that the
> line is
> > > ok to the interface,
> > > but he cannot see any lights burning on the
> > > intreface (B1 and B2 LEDs). When
> > > I do a sh isdn status, I get the following:
> > >
> > > Ener_Erkath#sh isdn status
> > > Global ISDN Switchtype = basic-net3
> > > ISDN BRI0/0 interface
> > > dsl 0, interface ISDN Switchtype =
> > > basic-1tr6
> > > Layer 1 Status:
> > > DEACTIVATED
> > > Layer 2 Status:
> > > Layer 2 NOT Activated
> > > Layer 3 Status:
> > > 0 Active Layer 3 Call(s)
> > > Activated dsl 0 CCBs = 0
> > > The Free Channel Mask: 0x80000003
> > > Total Allocated ISDN CCBs = 0
> > >
> > > When I change the ISDN switchtype to basic-net3,
> it
> > > doesn't change the
> > > status of the ISDN.
> > > Here is the output from the sh int bri0/0:
> > >
> > > Ener_Erkath#sh int bri0/0
> > > BRI0/0 is standby mode, line protocol is down
> > > Hardware is PQUICC BRI
> > > Internet address is 10.90.1.70/30
> > > MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,
> rely
> > > 255/255, load 1/255
> > > Encapsulation PPP, loopback not set
> > > Last input never, output never, output hang
> never
> > > Last clearing of "show interface" counters
> never
> > > Input queue: 0/75/0 (size/max/drops); Total
> output
> > > drops: 0
> > > Queueing strategy: weighted fair
> > > Output queue: 0/1000/64/0 (size/max
> > > total/threshold/drops)
> > > Conversations 0/0/256 (active/max
> active/max
> > > total)
> > > Reserved Conversations 0/0 (allocated/max
> > > allocated)
> > > 5 minute input rate 0 bits/sec, 0 packets/sec
> > > 5 minute output rate 0 bits/sec, 0 packets/sec
> > > 0 packets input, 0 bytes, 0 no buffer
> > > Received 0 broadcasts, 0 runts, 0 giants, 0
> > > throttles
> > > 0 input errors, 0 CRC, 0 frame, 0 overrun,
> 0
> > > ignored, 0 abort
> > > 21036936 packets output, 2224160372 bytes,
> 0
> > > underruns
> > > 0 output errors, 0 collisions, 3 interface
> > > resets
> > > 0 output buffer failures, 0 output buffers
> > > swapped out
> > > 140 carrier transitions
> > >
> > > Does anybody know if this could just mean that
> the
> > > interface is not
> > > functioning at all ? What do the carrier
> transitions
> > > mean ? And what does
> > > 'standby mode' mean ?
> > > I am also not able to bounce the interface
> > > (shutdown/no shutdown doesn't
> > > change the status on the interface, it remains
> in
> > > standby mode).
> > > Thanks for your help in advance !
> > >
> > > Regards,
> > >
> > > Georg
> > >
> > >
> > >
>
>________________________________________________________________________
> > > Get Your Private, Free E-mail from MSN Hotmail
> at
> > > http://www.hotmail.com
> > >
> > > ___________________________________
> > > UPDATED Posting Guidelines:
> > > http://www.groupstudy.com/list/guide.html
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com
> > > Report misconduct and Nondisclosure violations
> to
> > > [EMAIL PROTECTED]
> > >
> > >
> > >
> >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Get Yahoo! Mail – Free email you can access from
> anywhere!
> >http://mail.yahoo.com/
> >
> >___________________________________
> >UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> >FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> >Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
>
________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at
> http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
>
>
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail – Free email you can access from anywhere!
http://mail.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
