On Wed, 26 Jul 2000, Marc Quibell wrote:
> I have a simple question, and one which I cannot readily answer at this
> time. Can I safely connect TWO switch ports from a Cisco 5509 (two different
> switch blades) to a hub to increase the hub's crossconnection bandwidth,
> without having a looping problem? The hub is actually a DEC multi-blade,
> with a swithced backplane. The hub is also connect on two different blades,
> but the same backplane. TIA!
>
> btw, I have already done this and I figured if spanning tree found a looping
> problem, it wouldv'e set one of the ports to a non-forwarding state..
Correct, so long as you have STP enabled you are ok.
Brian
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
--
-----------------------------------------------
Brian Feeny, CCNA, CCDA [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]