Sounds like you have flow control enabled on the PC port you're using to
connect to the router.
groupstudy wrote:
> too bad , i will throw my 2503 out of window ,kiding..,thanks anyway
> ElephantChild wrote in message ...
> >On Sat, 29 Jul 2000, groupstudy wrote:
> >
> >> I got a cisco 2503 . I can't get access to the console except that i
> can
> >> see the information in the terminal window but can't not type .and
> >> unfortunately I lost the telnet password and enable password.
> >
> >Do the same cable and terminal emulator work with other routers? If tey
> >do, check that the cable is properly seated and that there isn't dirt in
> >the console port on the router. If it still doesn't work, the router
> >may be set up for software flow control, or hardware flow control, or
> >none at all. Try fiddling with the flow control setup on your terminal
> >emulator and see what happens.
> >
> >If you have a null modem cable, you may also try the aux port.
> >
> >> my question is whether doing a password recovery to this router without
> >> getting access to the console port is possible ??
> >
> >No.
> >
> >--
> >Bungee jumping and skydiving are for wimps. If you want to experience
> >true gut-wrenching terror, have children. --Dusty Rhoades.
> >
> >___________________________________
> >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> >FAQ, list archives, and subscription info: http://www.groupstudy.com
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >---
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
