Hi, i am not using flow control on the laptop and i am sure the lap top is
ok ,I can get access to the other 2514 using same cable and same laptop
without problem .
  some people said it is possible to use aux via a null modem cable , can
you specify a little bit more in detail??
Thanks

neal rauhauser wrote in message <[EMAIL PROTECTED]>...
>
>   Sounds like you have flow control enabled on the PC port you're using to
>connect to the router.
>
>
>
>groupstudy wrote:
>
>> too bad , i will throw my 2503 out of window ,kiding..,thanks anyway
>> ElephantChild wrote in message ...
>> >On Sat, 29 Jul 2000, groupstudy wrote:
>> >
>> >>    I got a cisco 2503 . I can't get access to the console except that
i
>> can
>> >> see the information in the terminal window but can't not type .and
>> >> unfortunately I lost the telnet password and enable password.
>> >
>> >Do the same cable and terminal emulator work with other routers? If tey
>> >do, check that the cable is properly seated and that there isn't dirt in
>> >the console port on the router. If it still doesn't work, the router
>> >may be set up for software flow control, or hardware flow control, or
>> >none at all. Try fiddling with the flow control setup on your terminal
>> >emulator and see what happens.
>> >
>> >If you have a null modem cable, you may also try the aux port.
>> >
>> >>   my question is whether doing a password recovery to this router
without
>> >> getting access to the console port is possible ??
>> >
>> >No.
>> >
>> >--
>> >Bungee jumping and skydiving are for wimps. If you want to experience
>> >true gut-wrenching terror, have children. --Dusty Rhoades.
>> >
>> >___________________________________
>> >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>> >FAQ, list archives, and subscription info: http://www.groupstudy.com
>> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>> >---
>>
>> ___________________________________
>> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>> FAQ, list archives, and subscription info: http://www.groupstudy.com
>> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>---


___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to