Rayza,
It would seem strange that you are having collisions on FastEthernet0/7 yet
it is set to Full Duplex. Did you change the duplex settings and not clear
the counters ? Do you have a problem that you are troubleshooting or is
this just a test :-)
Jeff Humphreys
----- Original Message -----
From: rayza manesh <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, July 28, 2000 8:36 AM
Subject: 29xx switch
> Group,
>
> How would you interpret / translate these entries and if you see any trace
> of error how would you troubleshoot it?
>
> Thank you for responding
>
>
> 2924c#show controllers ethernet-controller
>
> Transmit FastEthernet0/5 Receive
> 538094835 Bytes 3906491772 Bytes
> 3624591 Unicast frames 5028897 Unicast frames
> 281400 Multicast frames 0 Multicast frames
> 1185752 Broadcast frames 25235 Broadcast frames
> 0 Discarded frames 2 No bandwidth frames
> 0 Too old frames 0 No buffers frames
> 109875 Deferred frames 4 No dest, unicast
> 80754 1 collision frames 0 No dest, multicast
> 82613 2 collision frames 0 No dest, broadcast
> 29839 3 collision frames 0 Alignment errors
> 14630 4 collision frames 0 FCS errors
> 64619 5 collision frames 187 Collision fragments
> 92952 6 collision frames
> 34412 7 collision frames 1560598 Undersize frames
> 5250 8 collision frames 564263 Minimum size frames
> 333 9 collision frames 1281283 65 to 127 byte frames
> 8 10 collision frames 487990 128 to 255 byte frames
> 0 11 collision frames 155193 256 to 511 byte frames
> 0 12 collision frames 352075 512 to 1023 byte frames
> 0 13 collision frames 2213332 1024 to 1518 byte frames
> 0 14 collision frames 0 Oversize frames
> 0 15 collision frames
> 0 Excessive collisions
> 0 Late collisions
> *******************************************
>
> 2924c#sh controller switch
>
> Switch registers:
>
> Device Type : 0x00030073
> Congestion Threshold : 0x000091C0
> Peak Total Allocation : 0x00000224
> Total Allocation : 0x00000000
> Peak Total Bandwidth : 0x000009D8
> Total Bandwidth : 0x00000000
> Total Bandwidth Limit : 0x00000A29
> Lower Bandwidth Limit : 0x0000003F
> Switch Mode : 0x00140000
>
> Cumulative garbage collection collected 0x6E7C buffers.
>
>
> **********************************************************
> FastEthernet0/7 is up, line protocol is up
> Hardware is Fast Ethernet, address is 0050.2ae1.e047 (bia
0050.2ae1.e047)
> Description: Firewall
> MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255
> Encapsulation ARPA, loopback not set, keepalive not set
> Full-duplex, 100Mb/s, 100BaseTX/FX
> ARP type: ARPA, ARP Timeout 04:00:00
> Last input never, output 00:00:01, output hang never
> Last clearing of "show interface" counters never
> Queueing strategy: fifo
> Output queue 0/40, 0 drops; input queue 0/75, 0 drops
> 5 minute input rate 243000 bits/sec, 33 packets/sec
> 5 minute output rate 26000 bits/sec, 33 packets/sec
> 4936116 packets input, 3850732772 bytes, 0 no buffer
> Received 3659 broadcasts, 0 runts, 0 giants, 0 throttles
> 4404 input errors, 0 CRC, 0 frame, 0 overrun, 10 ignored, 0 abort
> 0 watchdog, 0 multicast
> 0 input packets with dribble condition detected
> 5880690 packets output, 945033918 bytes, 0 underruns
> 0 output errors, 3286 collisions, 3 interface resets
> 0 babbles, 0 late collision, 7548 deferred
> 0 lost carrier, 0 no carrier
> 0 output buffer failures, 0 output buffers swapped out
>
>
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
