You have to turn on the appropriate debugging commands, i.e. debug ip
routing or whatever you're wanting to see.
Dave
-----Original Message-----
From: Eric Hauptman [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 04, 2000 1:18 AM
To: [EMAIL PROTECTED]
Subject: Terminal Monitor problem
I am dialing into a 2600 router using Hyperterminal. I need to see the
router messages on the Hyperterm screen and have issued "Terminal
Monitor" successfully. However, it is not working. I have another 2600
that displays the messages just fine. Any ideas what might be the
problem. Both routers are running the same IOS.
Eric
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
