Problem fixed. The command "logging synchronous" was enabled on line
console 0 and for some reason having this command enabled prevents output to
the terminal. Anyone know why this might be? Thanks.
Eric
Eric Hauptman wrote:
> I am dialing into a 2600 router using Hyperterminal. I need to see the
> router messages on the Hyperterm screen and have issued "Terminal
> Monitor" successfully. However, it is not working. I have another 2600
> that displays the messages just fine. Any ideas what might be the
> problem. Both routers are running the same IOS.
>
> Eric
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
