Hi all,
could any one tell me why collisions counter increases
on ethernet port ....what should i do to prevent
this.....Thanks in adv
*****************************************************
sh int e 0/0
Ethernet0/0 is up, line protocol is up
Hardware is AmdP2, address is 0010.7be1.6cc1 (bia
0010.7be1.6cc1)
Internet address is 202.41.11.40/24
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely
255/255, load 4/255
Encapsulation ARPA, loopback not set, keepalive set
(10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang
never
Last clearing of "show interface" counters 19:30:29
Queueing strategy: fifo
Output queue 0/40, 54 drops; input queue 0/75, 0
drops
5 minute input rate 830000 bits/sec, 126 packets/sec
5 minute output rate 195000 bits/sec, 113
packets/sec
2135956 packets input, 1236837647 bytes, 0 no
buffer
Received 205775 broadcasts, 0 runts, 0 giants, 0
throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0
ignored, 0 abort
0 input packets with dribble condition detected
2503462 packets output, 859332285 bytes, 0
underruns
0 output errors, **305764 collisions**, 0
interface resets
0 babbles, 0 late collision, 35665 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers
swapped out
SPZRTR1#
__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
