hi 
i have connected my ethernet port on Baynetworks
switch of 10baseT.

Thanks ..
Sanjay

--- Rui Fonseca <[EMAIL PROTECTED]> wrote:
> is your router connected to a catalyst switch ?
> if so you should force the same speed and duplex in
> both the router and the
> switch ! ( the switch by default is auto-auto )
> 
> Cumprimentos
> (Regards)
> Rui Fonseca
> 
> 
> 
> > -----Mensagem original-----
> > De: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]Em nome de Cisco
> > Study
> > Enviada: Sexta-feira, 4 de Agosto de 2000 5:55
> > Para: [EMAIL PROTECTED]
> > Assunto: collision
> >
> >
> > Hi all,
> >
> > could any one tell me why collisions counter
> increases
> > on ethernet port ....what should i do to prevent
> > this.....Thanks in adv
> >
>
*****************************************************
> > sh int e 0/0
> > Ethernet0/0 is up, line protocol is up
> >   Hardware is AmdP2, address is 0010.7be1.6cc1
> (bia
> > 0010.7be1.6cc1)
> >   Internet address is 202.41.11.40/24
> >   MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
> rely
> > 255/255, load 4/255
> >   Encapsulation ARPA, loopback not set, keepalive
> set
> > (10 sec)
> >   ARP type: ARPA, ARP Timeout 04:00:00
> >   Last input 00:00:00, output 00:00:00, output
> hang
> > never
> >   Last clearing of "show interface" counters
> 19:30:29
> >   Queueing strategy: fifo
> >   Output queue 0/40, 54 drops; input queue 0/75, 0
> > drops
> >   5 minute input rate 830000 bits/sec, 126
> packets/sec
> >   5 minute output rate 195000 bits/sec, 113
> > packets/sec
> >      2135956 packets input, 1236837647 bytes, 0 no
> > buffer
> >      Received 205775 broadcasts, 0 runts, 0
> giants, 0
> > throttles
> >      0 input errors, 0 CRC, 0 frame, 0 overrun, 0
> > ignored, 0 abort
> >      0 input packets with dribble condition
> detected
> >      2503462 packets output, 859332285 bytes, 0
> > underruns
> >      0 output errors, **305764 collisions**, 0
> > interface resets
> >      0 babbles, 0 late collision, 35665 deferred
> >      0 lost carrier, 0 no carrier
> >      0 output buffer failures, 0 output buffers
> > swapped out
> > SPZRTR1#
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Kick off your party with Yahoo! Invites.
> > http://invites.yahoo.com/
> >
> > ___________________________________
> > UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> 


__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/

___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to