Before adding authentication into the mix, I would remove it and start working from the physical layer up. Which router is supposed to provide clocking? Don't you need the "clockrate" keywork on the DCE?
Mario -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Sunday, March 30, 2003 9:18 PM To: [EMAIL PROTECTED] Subject: Re: PPP Problems - any ideas!!! [7:66486] Did this ever work? Does it work with HDLC? Notice that O in the debug output? That means Output. In a working environment, you would also see I for input. Very strange indeed, but the best advice is to start troubleshooting at the bottom of the OSI model. Let us know. Now you got us curious. :-) Thanks, Priscilla saunders1m wrote: > > Thanks for your help gents, im sure though i am missing > something here as i > have tried everything though i still seem to be missing > something!!!!! Any > further ideas would be great & im stuck for moment!! > > Here is my both configs & the #show int s0 > When using debug ppp neg i get the following > > R10-1603R#debug ppp neg > PPP protocol negotiation debugging is on > R10-1603R# > 02:38:11: Se0 LCP: TIMEout: State Listen > 02:38:11: Se0 LCP: O CONFREQ [Listen] id 166 len 14 > 02:38:11: Se0 LCP: AuthProto PAP (0x0304C023) > 02:38:11: Se0 LCP: MagicNumber 0x06B8DFA1 (0x050606B8DFA1) > R10-1603R# > 02:38:13: Se0 LCP: TIMEout: State REQsent > 02:38:13: Se0 LCP: O CONFREQ [REQsent] id 167 len 14 > 02:38:13: Se0 LCP: AuthProto PAP (0x0304C023) > 02:38:13: Se0 LCP: MagicNumber 0x06B8DFA1 (0x050606B8DFA1) > R10-1603R#no > 02:38:15: Se0 LCP: TIMEout: State REQsent > 02:38:15: Se0 LCP: O CONFREQ [REQsent] id 168 len 14 > 02:38:15: Se0 LCP: AuthProto PAP (0x0304C023) > 02:38:15: Se0 LCP: MagicNumber 0x06B8DFA1 (0x050606B8DFA1) > R10-1603R#no debug > 02:38:17: Se0 LCP: TIMEout: State REQsent > > Router 9 > > R9-1601R#show run > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname R9-1601R > ! > enable password cisco > ! > username R10-1603R password 0 cisco > ip subnet-zero > no ip domain-lookup > ip host r1 192.169.1.1 > ip host r2 192.169.2.2 > ip host r3 192.169.3.3 > ip host r4 192.169.4.4 > ip host r5 192.169.5.5 > ip host r6 192.169.6.6 > ip host r7 192.169.7.7 > ip host r8 192.169.8.8 > ip host r9 192.169.9.9 > ip host r10 192.169.10.10 > ip host cat19 192.169.11.11 > ip host r12 192.169.12.12 > ! > ! > ! > interface Loopback0 > ip address 192.169.9.9 255.255.255.0 > no ip directed-broadcast > ! > interface Ethernet0 > no ip address > no ip directed-broadcast > shutdown > ! > interface Serial0 > ip address 10.0.0.1 255.255.255.0 > no ip directed-broadcast > encapsulation ppp > no fair-queue > ppp authentication pap > ppp pap sent-username R9-1601R password 7 121A0C041104 > ! > ip classless > ! > banner login ^C Welcome to www.ciscorack.co.uk - R9 Cisco 1601R > Series ^C > ! > line con 0 > exec-timeout 15 0 > password d231303u > logging synchronous > login > transport input none > line vty 0 4 > exec-timeout 15 0 > password d231303u > login > ! > end > > Serial0 is up, line protocol is down > Hardware is QUICC Serial > Internet address is 10.0.0.1/24 > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, > load 1/255 > Encapsulation PPP, loopback not set, keepalive set (10 sec) > LCP Listen > Closed: IPCP, CDPCP > Last input never, output never, output hang never > Last clearing of "show interface" counters never > Queueing strategy: fifo > Output queue 0/40, 0 drops; input queue 0/75, 0 drops > 5 minute input rate 0 bits/sec, 0 packets/sec > 5 minute output rate 0 bits/sec, 0 packets/sec > 0 packets input, 0 bytes, 0 no buffer > Received 0 broadcasts, 0 runts, 0 giants, 0 throttles > 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 > abort > 81 packets output, 1462 bytes, 0 underruns > 0 output errors, 0 collisions, 45 interface resets > 0 output buffer failures, 0 output buffers swapped out > 70 carrier transitions > DCD=up DSR=up DTR=up RTS=up CTS=up > > Router 10 > > R10-1603R#show run > Building configuration... > > Current configuration: > ! > version 12.0 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname R10-1603R > ! > enable password cisco > ! > username R9-1601R password 0 cisco > ip subnet-zero > no ip domain-lookup > ip host r1 192.169.1.1 > ip host r2 192.169.2.2 > ip host r3 192.169.3.3 > ip host r4 192.169.4.4 > ip host r5 192.169.5.5 > ip host r6 192.169.6.6 > ip host r7 192.169.7.7 > ip host r8 192.169.8.8 > ip host r9 192.169.9.9 > ip host r10 192.169.10.10 > ip host cat19 192.169.11.11 > ip host r12 192.169.12.12 > ! > ! > ! > interface Loopback0 > ip address 192.169.10.10 255.255.255.0 > no ip directed-broadcast > ! > interface Ethernet0 > no ip address > no ip directed-broadcast > shutdown > ! > interface Serial0 > ip address 10.0.0.2 255.255.255.0 > no ip directed-broadcast > encapsulation ppp > no fair-queue > ppp authentication pap > ppp pap sent-username R10-1603R password 7 05080F1C2243 > ! > interface BRI0 > no ip address > no ip directed-broadcast > shutdown > ! > ip classless > ! > banner login ^C Welcome to www.ciscorack.co.uk - R10 Cisco > 1603R Series ^C > ! > line con 0 > exec-timeout 15 0 > password d231303u > logging synchronous > login > transport input none > line vty 0 4 > exec-timeout 15 0 > password d231303u > login > ! > end > > R10-1603R#sh int s0 > Serial0 is up, line protocol is down > Hardware is QUICC Serial > Internet address is 10.0.0.2/24 > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, > load 1/255 > Encapsulation PPP, loopback not set, keepalive set (10 sec) > LCP Listen > Closed: CDPCP > Last input never, output never, output hang never > Last clearing of "show interface" counters never > Queueing strategy: fifo > Output queue 0/40, 0 drops; input queue 0/75, 0 drops > 5 minute input rate 0 bits/sec, 0 packets/sec > 5 minute output rate 0 bits/sec, 0 packets/sec > 0 packets input, 0 bytes, 0 no buffer > Received 0 broadcasts, 0 runts, 0 giants, 0 throttles > 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 > abort > 83 packets output, 1494 bytes, 0 underruns > 0 output errors, 0 collisions, 38 interface resets > 0 output buffer failures, 0 output buffers swapped out > 77 carrier transitions > DCD=up DSR=up DTR=up RTS=up CTS=up > > > ""Jonathan V Hays"" wrote in message > news:[EMAIL PROTECTED] > > saunders1m wrote: > > > I have 2 routers connected back to back via a DTE - DCE > crossover cable > and > > > i am trying to establish a ppp connection though i can't > seem to make > the > > > connection and when i try using debug ppp authentication i > get: > > > > > > 01:57:10: Se0 PPP: Treating connection as a dedicated line > > > > > > Is my config right??? > > > > > > Router 1 (r9) > > > > > > username r10 password cisco > > > interface Serial0 > > > ip address 10.0.1.1 255.255.255.0 > > > no ip directed-broadcast > > > encapsulation ppp > > > no fair-queue > > > ppp authentication pap > > > > > > > > > Add "ppp pap sent-username r9 password cisco" to r9, and > > similarly to r10. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66530&t=66486 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]