It looks good to me, All that is necessary is the following: Logging on Logging monitor debug Term mon (Each time you telnet in) Debug Traffic to your telnet session should now be generated.
-----Original Message----- From: James Gosnold [mailto:[EMAIL PROTECTED] Sent: Thursday, April 03, 2003 1:47 PM To: [EMAIL PROTECTED] Subject: RE: Debug display to VTY [7:66762] Hi Robert, This is what I have..... Router#show log Syslog logging: enabled (0 messages dropped, 0 messages rate-l Console logging: level debugging, 413770 messages logged Monitor logging: level debugging, 285 messages logged Logging to: vty6(0) Buffer logging: disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Trap logging: level informational, 36 message lines logged Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=66779&t=66762 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]