Here is a question to which I have not been able to find a definitive answer. Assume the following. In a default configuration, you are asked to configure DLSW for 50% of the interfaces bandwidth, IP traffic should receive 25% of the interface bandwidth, and all other traffic should use the remaining 25%. Given the fact that CBWFQ by default only uses 75% of the interface bandwidth unless you configure the max-reserved-bandwidth x%, if you put the following configuration onto the interface, what percentages of the interfaces's bandwidth are you actually allocating?
policy-map shape class DLSW bandwidth percent 50 class IP bandwidth percent 25 If you do not issue the max-reserved-bandwidth command, have you only allocated 75% of the default 75% available to CBWFQ or have you actually met the requirements of the task? ------------------------------------------------------------------------------ Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you. ============================================================================== Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=69823&t=69823 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]