debug isdn q921 is for the layer 2 activity ( for the signalling between the router and the swith, like TEI, SAPI...)
you can be using: debug dialer debug isdn q931 to watch what is going layer 3. you can check sh isdn stat --> and see the number of channels occupied or sh int bri 0 --> for the D channel sh int bri 0:1-> for the first B channel sh int bri 0:2 for the second be channel Regards Devvvv ----- Original Message ----- From: "Dom" To: Sent: Tuesday, June 03, 2003 1:39 PM Subject: RE: BRI [7:70059] > Show isdn status then use debug isdn q921 for more detailed information. > > > Best regards, > > Dom Stocqueler > CTO - SysDom Technologies > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: 03 June 2003 10:33 > To: [EMAIL PROTECTED] > Subject: Re: BRI [7:70059] > > > Hi ppl, > > i'm encountering some issues on the 2nd channel, it takes quite a while > for it to come up despite the 1st channel hits the threshold, is there > any command that i can issue to monitor on the 2nd channel? > > thanks > > regards, > > jef Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70069&t=70059 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]