Actually a debug isdn q931 would be more pertinent, 921 is your conection to the switch whereas 931 is call setup. A debug dialer could also be useful.
Dave Andrew Larkins wrote: > as well as debu ppp multilink > > -----Original Message----- > From: Dom [mailto:[EMAIL PROTECTED] > Sent: 03 June 2003 13:39 > To: [EMAIL PROTECTED] > Subject: RE: BRI [7:70059] > > > Show isdn status then use debug isdn q921 for more detailed information. > > > Best regards, > > Dom Stocqueler > CTO - SysDom Technologies > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: 03 June 2003 10:33 > To: [EMAIL PROTECTED] > Subject: Re: BRI [7:70059] > > > Hi ppl, > > i'm encountering some issues on the 2nd channel, it takes quite a while > for it to come up despite the 1st channel hits the threshold, is there > any command that i can issue to monitor on the 2nd channel? > > thanks > > regards, > > jef -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=70075&t=70059 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
