Hi. I run another port scan test. This time the only service
which was up was telnet. Meanwhile the routers are 2501 which
I said 2503. Please check whether your routers support these
commands and inform me:
ip cef
rate-limit
Thanks
cheers
Kiarash
Chuck Larrieu wrote:
>
> Hi. Thanks for all this info.
>
> Would you mind, if you have a few moments - running another port scan and
> telling me what you see now?
>
> Thanks.
>
> Chuck
>
> -----Original Message-----
> From: Kiarash Bodouhi [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, August 05, 2000 2:22 PM
> To: Chuck Larrieu
> Subject: Re: Problem Cleared? Want ot try the Follies Again?
>
> Hello Chunck:
>
> Here are the answers. Please correct me if I made some mistakes.
> One question! Please check that following router does have these
> two commands and inform me:
> ip cef
> rate-limit
> Thanks in advance :)
>
> Router Cisco 2503 , 16M Flash, 16M RAM,
> IOS 12.1.2 Enterprise Plus IPSEC 56
> System flash directory:
> File Length Name/status
> 1 15705712 c2500-jos56i-l.121-2.bin
> [15705776 bytes used, 1071440 available, 16777216 total]
> 16384K bytes of processor board System flash (Read
> ONLY)
>
> Interfaces:
> Ethernet 0:
> Internet address is 64.220.150.9/24
> IPX address is
> BBBB.0010.7b7e.ebe1
> Serial 0:
> Internet address is 10.3.3.3/8
> IPX address is
> ABAB.0010.7b7e.ebe1
> Encap FrameRelay PVC DLCI:300 P-t-P:10.2.2.2
> Serial 1:
> Down
>
> Routing Protocols:
> EIGRP, RIP(IPX)
>
> Port scan test on the target shows these available ports:
> Scanning host 64.220.150.9, ports 0 to 10000
>
> Port 7 found. Desc='echo'
> Port 9 found. Desc='discard'
> Port 19 found. Desc='chargen'
> Port 23 found. Desc='telnet'
> Port 79 found. Desc='finger'
> Port 13 found. Desc='daytime'
>
> The results to access finger shows this error message:
> [root@solarix /root]# finger @64.220.150.9
> [64.220.150.9]
>
> Line has invalid autocommand "show users"
> [root@solarix /root]#
>
> Privilege level: I guess it is 0 with TACACS+ to restrict or grant
> extra functionality.
>
> Cisco Kid : DuncanReynaldoPla ?!!
>
> Connected via Serial0 (Encap FrameRelay PVC DLCI:300 P-t-P:10.2.2.2)
> to the same router with exact physical specifications and IOS software
> at 10.2.2.2.
>
> Cheers
> Kiarash
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
