reboot the bridge try a different crossover cable. can you set them both to full-duplex? (probably not on the bridge) can you recreate the problem by connecting the bridge to another router to test it? is this problem new? is any of the equipment new?
""neil K"" wrote in message news:[EMAIL PROTECTED] > One of my Cisco router's Ethernet interface connected to a Cisco Wireless > Bridges has the interface collisions counter increasing rapidly. Over a > period of 48 hrs the collision counter was 60,000 and the output error > counter was more than 40000. Both the Ethernet interface on the router and > the Cisco Wireless bridge are set to 10/Half-duplex. > There is nothing in between the bridge and the Router Ethernet, connected by > a cross-over cable. What could be causing this. > > Any comments, > > neil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71183&t=71176 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
