You can 'session' to the MSFC without previously configuring anything (like IP address) on it, right? So it can't be telnet... :)
Thanks, Zsombor At 12:22 PM 6/25/2003 +0000, Dave C. wrote: >I have a MSFC on a 6509 that I am firing up for the first time. The 6509 is >running CAT-OS (Hybrid Mode). > >I have defined several VLAN interfaces on the MSFC, and now must create a >specific access-list to limit only a certain source and port address to >reach each of these VLAN's. This access-list will not allow Telnet >connectivity. > >My question is, if I create this access list and bind it to all VLANs, will >I be able to SESSION over from the switch to the MSFC? Does the SESSION >command actually use Telnet to get to the MSFC? Will I need to assign a >loopback address and then allow access to the loopback address specifically >in my access-list? > >I just want to make sure that I do not block all access to the MSFC. > >Any clarification on this would be helpful. > >Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=71345&t=71340 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
