I'm not very familiar with the newer releases of PIX software, but do you have to enable ICMP on those interfaces? It looks to me like you only have ICMP allowed going one direction. This is a very common problem and easily fixed. Also, if something is being blocked it should be apparent from the logs why it was blocked.
HTH, John ----- Original Message ----- From: "Vajira Wijesinghe" To: Sent: Tuesday, July 15, 2003 4:23 PM Subject: do you know why? [7:72352] > I have a pix firewall and i have a strange problem. > If any one of you have come across this pls let me know the solution. > > I have few servers at both sides of the PIX. > eg. Server-A at Outside zone and Server-B at Inside zone. > > 1. When I ping from Server-B to Server-A, I get request timeout. > 2. Now I go to Server-A and start a ping to Server-B. It works fine. > 3. Then again I go back to Server-B to ping to Server-A, and now it > starts pinging!!! > > Can anyone of you explain this??? > I need to get this thing resloved and straight away ping from B to A. > Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72362&t=72352 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
