This was discussed a milion times; static route that points to an interface has AD=1.
Sasa CCIE #8635 Nakul Malik wrote: > > by default, a static route has an AD of 1. > If the static route points to an exit interface, the AD=0. > > That is the only difference > > HTH. > > -Nakul > > ""Karyn Williams"" wrote in message > news:[EMAIL PROTECTED] > > We recently added another interface, S1/1, that connects a private line to > > another school. We are routing 156.3.37.0 to them. Should I have route > > statements that say > > > > ip route 156.3.37.0 255.255.255.0 192.168.0.2 > > > > or > > > > ip route 156.3.37.0 255.255.255.0 Serial1/1 > > > > Current config: > > > > ip route 0.0.0.0 0.0.0.0 Serial0/0 > > ip route 0.0.0.0 0.0.0.0 Serial0/1 > > ip route 0.0.0.0 0.0.0.0 Serial1/0 > > ip route 65.165.174.0 255.255.254.0 FastEthernet0/0 > > ip route 156.3.37.0 255.255.255.0 192.168.0.2 > > ip route 198.182.157.0 255.255.255.0 65.165.175.253 > > ip route 207.233.56.0 255.255.255.0 192.168.0.2 > > > > > > I am interested if there is a performance difference between these two > > route statements or any other reason why one would be preferred over the > > other. TIA. > > > > > > > > > > -- > > > > Karyn Williams, CNE > > Network Services Manager > > California Institute of the Arts > > [EMAIL PROTECTED] > > http://www.calarts.edu/network -- Regards, Sasa CCIE #8635 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=72464&t=72406 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
