Dave, Blade 3 is bad. Open a TAC case, if you have support, and get the blade replaced.
Jim -----Original Message----- From: MADMAN [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 29, 2003 3:49 PM To: [EMAIL PROTECTED] Subject: 6500 10/100 line card COIL numbering [7:73194] Hi, I have a customer whose 6500 switch seing this error: %SYS-3-SYS_LCPERR3:Module 3: Coil 1 Port 7: stuck 3 Does anyone know if the COILs start with number 0 or 1? I know there is 1 COIL per 12 ports and 1 Pinnacle ASIC per 4 COILs bt I can not find anywhere how the COILs are numbered. I am trying to identify the suspect ports but can't find the numbering scheme anywhere!! Thanks Dave -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73236&t=73194 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]