Hi..Dear friends, I was very confused with the confuration file of 5505, my
colleages send me two configuration file in Tokyo.
One start with SOMETAROU#sh conf
Another one start with sometarou> (enable) sh conf
and two of them give me different configuration, (see below)
1)can any one tell me, what is the different?
2)I can telnet to my backbone switches, after I type 5505>en password
it gives me 5505>(enable) prompt then what should I type to get the 5505#
prompt
3)What is the special function 5505 back bone switch? Can you use normal
switch like 1900, 2900 to replace it? (optional)
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
&&&&&&
SOMETAROU#sh conf
Using 1961 out of 126968 bytes
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname SOMETAROU
!
enable secret 5 $1$0U5tyfSAgpNPpsjXQ4xGI/
!
!
interface Vlan1
description RABO-JP
ip address 57.198.45.251 255.255.255.0
ip broadcast-address 57.198.45.255
no ip redirects
standby 1 priority 100
standby 1 preempt
standby 1 ip 57.198.45.250
!
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
&&&&&&&&
sometarou> (enable) sh conf
.....
..........
.........
..........
..........
..........
..
begin
set password $1$PEV9$MXJwjj4umvPJ7aj.0KeUa.
set enablepass $1$3Las$CDZgLGUVTKg7qozn9jnsK0
set prompt Console>
set length 24 default
set logout 20
set banner motd ^C
********************
* Catalyst 5505 #2 *
* SupervisorEngine *
* sometarou *
********************
^C
!
#system
set system baud 9600
set system modem disable
set system name sometarou
set system location
set system contact
!
#snmp
set snmp community read-only public
set snmp community read-write private
set snmp community read-write-all secret
set snmp rmon disable
set snmp trap disable module
set snmp trap disable chassis
set snmp trap disable bridge
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]