1)
The first one
> SOMETAROU#sh conf
> Using 1961 out of 126968 bytes
> !
> version 11.2
> no service password-encryption
.....
is the configuration of RSM module (internal router)
the second one
> sometarou> (enable) sh conf
> .....
> ..........
> ..........
> ..
>
> begin
> set password $1$PEV9$MXJwjj4umvPJ7aj.0KeUa.
> set enablepass $1$3Las$CDZgLGUVTKg7qozn9jnsK0
> set prompt Console>
.......
is the configuratione of the switch (supervisor)
2) 5505> (enable) session <number of the RSM module> (es. session 4)
Stefano
> -----Original Message-----
> From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]]
> Sent: marted́ 8 agosto 2000 9.59
> To: '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]'
> Subject: why the prompt is different for 5505 switches? any one know?
>
>
> Hi..Dear friends, I was very confused with the confuration
> file of 5505, my
> colleages send me two configuration file in Tokyo.
>
> One start with SOMETAROU#sh conf
>
> Another one start with sometarou> (enable) sh conf
>
> and two of them give me different configuration, (see below)
>
> 1)can any one tell me, what is the different?
>
> 2)I can telnet to my backbone switches, after I type 5505>en
> password
> it gives me 5505>(enable) prompt then what should I type to
> get the 5505#
> prompt
>
> 3)What is the special function 5505 back bone switch? Can
> you use normal
> switch like 1900, 2900 to replace it? (optional)
>
>
> &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
> &&&&&&&&&&&&&&
> &&&&&&
> SOMETAROU#sh conf
> Using 1961 out of 126968 bytes
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname SOMETAROU
> !
> enable secret 5 $1$0U5tyfSAgpNPpsjXQ4xGI/
> !
> !
> interface Vlan1
> description RABO-JP
> ip address 57.198.45.251 255.255.255.0
> ip broadcast-address 57.198.45.255
> no ip redirects
> standby 1 priority 100
> standby 1 preempt
> standby 1 ip 57.198.45.250
> !
> &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
> &&&&&&&&&&&&&&
> &&&&&&&&
> sometarou> (enable) sh conf
> .....
> ..........
> .........
> ..........
> ..........
> ..........
> ..
>
> begin
> set password $1$PEV9$MXJwjj4umvPJ7aj.0KeUa.
> set enablepass $1$3Las$CDZgLGUVTKg7qozn9jnsK0
> set prompt Console>
> set length 24 default
> set logout 20
> set banner motd ^C
>
> ********************
> * Catalyst 5505 #2 *
> * SupervisorEngine *
> * sometarou *
> ********************
> ^C
> !
> #system
> set system baud 9600
> set system modem disable
> set system name sometarou
> set system location
> set system contact
> !
> #snmp
> set snmp community read-only public
> set snmp community read-write private
> set snmp community read-write-all secret
> set snmp rmon disable
> set snmp trap disable module
> set snmp trap disable chassis
> set snmp trap disable bridge
>
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
