Jens, Assuming this is legacy DDR, do you have a static layer 3 to layer 2 resolution (dialer map) for the IP of the remote end? Post your config if you're still having trouble.
HTH, Brian McGahan, CCIE #8593 [EMAIL PROTECTED] Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-334-8987 Direct: 708-362-1418 (Outside the US and Canada) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jens Petter Eikeland Sent: Tuesday, September 02, 2003 11:16 AM To: [EMAIL PROTECTED] Subject: Question regarding dialer-watch [7:74667] I have put up a solution with isdn backup to a primary Frame-Relay link. This is set up with Tacacs callback solution. The link seems to function fine. Then I try to put on dialer-watch on the client side of this link. When I shall test this by bringing sown the primary, everything looks fine. The backup is coming up, the routes ar prefered over isdn. But when I try to send any trafic I form of pings or telnet nothing happens Even when the link are up my packet wont go over the link. I have also a friend that is having the same problem, and then I guess There will be other that has experienced this.. Please help, I have only days before my lab attempt Jens P **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=74760&t=74667 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html