Hi all, In the following config, which was cut from the CD, why would we need the "ip forward-protocol" there, I though the ip-helped address would do the job, to forward all the broadcast to the servers, is that right? Thanks Kent "In the following example, one router is on network 191.24.1.0 and the other is on network 110.44.0.0, and you want to permit IP broadcasts from hosts on either network segment to reach both servers. Figure 14 illustrates how to configure the router that connects network 110 to network 191.24.1. Figure 14: IP Helper Addresses The following example shows the configuration: ip forward-protocol udp ! interface ethernet 1 ip helper-address 110.44.23.7 interface ethernet 2 ip helper-address 191.24.1.19 __________________________________________________ Do You Yahoo!? Send instant messages & get email alerts with Yahoo! Messenger. http://im.yahoo.com/ ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
