Collisions are usually normal, that's what CSMA/CD is based on.
However, I would check the following:
1)Check switch port statistics from the switch where the router connects to,
I would be more worry on Runts than collisitons.
2)Check Duplex transmission 10 half at both ends forced
3)Check cables from router to switch
I am currious to see more input on this from the group.
------Original Message------
From: "Mike Baker" <[EMAIL PROTECTED]>
To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
Sent: August 18, 2000 12:28:00 PM GMT
Subject: Ethernet Collisions
What could be possible reasons for getting collisions between a router and a
catalyst switch? The link is 10mbps.
Michael K. Baker
Telecom Network Analyst
ALLTEL Information Services
2000 Highland Road
Twinsburg, Ohio 44087
330-963-1648
www.alltel.com
INIHGROBMALATNAWI
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
R&S Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-989-8634 Evenings
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
.............................................................
voted #1 search engine! http://www.iwon.com why wouldn't you?
.............................................................
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
