more clues to my problems that all of you may find it useful
router1#ping 202.161.128.30
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 202.161.128.30, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
router1#ping
Protocol [ip]:
Target IP address: 202.161.128.30 (My Serial interface)
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]: y
Source address: 202.180.0.4 (My E0 interface)
Type of service [0]:
Set DF bit in IP header? [no]:
Validate reply data? [no]:
Data pattern [0xABCD]:
Loose, Strict, Record, Timestamp, Verbose[none]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 202.161.128.30, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
router1#
-----Original Message-----
From: Yee, Jason
Sent: Friday, August 25, 2000 2:13 PM
To: '[EMAIL PROTECTED]'
Subject: FW: can't ping or reach serial port
relying on you guys for help again
Jason
-----Original Message-----
From: Yee, Jason
Sent: Friday, August 25, 2000 11:39 AM
To: '[EMAIL PROTECTED]'
Subject: FW: can't ping or reach serial port
hi with regard to my last problem I have removed the access-group commands
on serial 1 and still I can't ping to serial's 1 ip address and ie
202.161.128.30, surprisingly I can telnet via this interface and I can ping
to the next hop 202.161.128.29 but I can't just ping to 202.161.128.30
I am really at a loss now and am really puzzled , could it be due to
frame-relay problem and any of this sort that I haven't knew
any kind souls who knows this please help
thanks
Jason
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Yee, Jason
Sent: Thursday, August 24, 2000 4:41 PM
To: '[EMAIL PROTECTED]'
Subject: can't ping or reach serial port
hi,
anyone knows how to solve this problem ?
I can't ping or traceroute to my serial port , I suspect is access list but
I am doing it on the router so it should not have any access-list issues
right
any input will be greatly appreciated :
ping result, execute from router itself:
router1#p 202.161.128.30
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 202.161.128.30, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
traceroute result to 202.161.128.30 from Yahoo.com:
FROM net.yahoo.com TO 202.161.128.30.
traceroute to 202.161.128.30 (202.161.128.30), 30 hops max, 40 byte packets
1 e-1.4700m-1.3400.yahoo.com (206.132.105.1) 0.990 ms 1.636 ms 1.070 ms
2 gw3-rtr (206.251.17.3) 2.380 ms 2.086 ms 1.161 ms
3 hssi1-0.gw4.sce.yahoo.com (216.115.100.249) 3.887 ms 2.424 ms 1.942
ms
4 peer-geo11.sce.yahoo.com (216.34.143.65) 1.954 ms 2.120 ms 1.763 ms
5 216.34.142.149 (216.34.142.149) 2.060 ms 1.810 ms 2.483 ms
6 dcr04-g2-0.sntc01.exodus.net (216.33.146.25) 2.335 ms 2.045 ms 2.298
ms
7 * * *
8 exodus-gw.sffca.ip.att.net (192.205.32.105) 6.426 ms 8.896 ms 6.720
ms
9 gbr2-p11.sffca.ip.att.net (12.123.12.242) 8.727 ms 7.433 ms 8.707 ms
10 gar1-p370.sffca.ip.att.net (12.123.13.61) 5.895 ms 6.899 ms 7.601 ms
11 12.123.195.17 (12.123.195.17) 248.321 ms 277.026 ms 243.271 ms
12 12.125.92.38 (12.125.92.38) 261.956 ms 266.575 ms *
13 202.161.130.21 (202.161.130.21) 206.170 ms 199.312 ms 248.880 ms
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
traceroute result to 202.180.8.100 from Yahoo.com:
FROM net.yahoo.com TO 202.180.8.100.
traceroute to 202.180.8.100 (202.180.8.100), 30 hops max, 40 byte packets
1 e-1.4700m-1.3400.yahoo.com (206.132.105.1) 1.124 ms 0.766 ms 0.745 ms
2 gw3-rtr (206.251.17.3) 2.329 ms 1.957 ms 1.109 ms
3 hssi1-0.gw4.sce.yahoo.com (216.115.100.249) 3.207 ms 1.878 ms 2.087
ms
4 peer-geo11.sce.yahoo.com (216.34.143.65) 1.700 ms 1.629 ms 1.636 ms
5 216.34.142.149 (216.34.142.149) 12.076 ms 1.880 ms 1.859 ms
6 dcr03-g2-0.sntc01.exodus.net (216.33.146.17) 1.767 ms 1.589 ms 1.760
ms
7 * * *
8 exodus-gw.sffca.ip.att.net (192.205.32.105) 6.270 ms 8.423 ms 8.113
ms
9 gbr2-p11.sffca.ip.att.net (12.123.12.242) 6.085 ms 8.080 ms 9.306 ms
10 gar1-p370.sffca.ip.att.net (12.123.13.61) 5.795 ms 6.917 ms 6.938 ms
11 12.123.195.17 (12.123.195.17) 223.784 ms 229.253 ms 224.913 ms
12 * 12.125.92.38 (12.125.92.38) 188.236 ms 195.586 ms
13 202.161.130.21 (202.161.130.21) 172.644 ms 177.564 ms 180.644 ms
14 * * *
15 masterdon.access.net.id (202.180.0.2) 567.652 ms 640.227 ms 2370.923
ms
16 pteredon100.access.net.id (202.180.8.100) 980.552 ms 1990.342 ms
2325.658 ms
router1#s log
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
Console logging: disabled
Monitor logging: level debugging, 0 messages logged
Trap logging: level informational, 69 message lines logged
router1#s conf
Using 2378 out of 32762 bytes
!
version 11.0
service nagle
service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname router1
!
enable secret 5 $1$golO$lfaocwB9l64SyG4Vqm2.T.
enable password 7 071C24404B0D0B0C
!
!
interface Ethernet0
ip address 202.180.0.4 255.255.255.0
!
interface Serial0
description Loral Cyberstar Satellite Connection
ip address 202.161.128.30 255.255.255.252
encapsulation frame-relay IETF
shutdown
frame-relay interface-dlci 189
frame-relay lmi-type ansi
!
interface Serial1
description Loral Cyberstar Satellite Connection
ip address 202.161.128.30 255.255.255.252
ip access-group 110 in
ip access-group 120 out
encapsulation frame-relay IETF
frame-relay interface-dlci 189
frame-relay lmi-type ansi
!
router bgp 7587
network 202.180.8.0 mask 255.255.248.0
network 202.180.2.0 mask 255.255.252.0
neighbor 202.161.128.29 remote-as 11919
!
ip domain-name access.net.id
ip name-server 202.180.0.13
ip route 0.0.0.0 0.0.0.0 202.180.0.1
ip route 202.180.2.0 255.255.255.0 202.180.0.1
ip route 202.180.3.0 255.255.255.0 202.180.0.1
ip route 202.180.8.0 255.255.248.0 Null0
ip route 202.180.8.72 255.255.255.248 202.180.0.3
ip route 202.180.8.96 255.255.255.224 202.180.0.2
ip route 202.180.8.128 255.255.255.224 202.180.0.3
ip route 202.180.10.16 255.255.255.240 202.180.0.3
ip route 202.180.10.32 255.255.255.240 202.180.0.1
ip route 202.180.10.48 255.255.255.240 202.180.0.3
ip route 202.180.10.80 255.255.255.240 202.180.0.3
ip route 202.180.10.128 255.255.255.224 202.180.0.1
ip route 202.180.10.192 255.255.255.224 202.180.0.1
ip route 202.180.10.224 255.255.255.240 202.180.0.1
ip route 202.180.11.16 255.255.255.240 202.180.0.1
ip route 202.180.12.192 255.255.255.192 202.180.0.10
ip route 202.180.13.0 255.255.255.0 202.180.0.9
ip route 202.180.14.0 255.255.255.0 202.180.0.6
no logging console
access-list 110 deny ip 202.180.0.0 0.0.31.255 any
access-list 110 permit ip any 202.180.0.0 0.0.31.255
access-list 110 permit ip any host 202.161.128.30
access-list 110 deny ip any any
access-list 120 permit ip 202.180.0.0 0.0.31.255 any
access-list 120 permit ip host 202.161.128.30 any
access-list 120 deny ip any any
access-list 131 permit ip any 202.180.14.0 0.0.0.255
snmp-server community gen0800 RO
!
line con 0
transport input none
line aux 0
transport input none
line vty 0 4
password 7 111A1C0912161905
login
!
end
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]