The ip classless command is used when setting up default routes. Cisco
routers (classful by default) expect a subnet mask when entering your static
ip route commands, so when you are setting up a default route, you must
specify ip classless, since no remote subnets will be in its routing table
for default routes.
Matt
""Yee, Jason"" <[EMAIL PROTECTED]> wrote in message
859B90209E2FD311BE5600902751445D2E7CF4@LYNX">news:859B90209E2FD311BE5600902751445D2E7CF4@LYNX...
> hi ,
>
> Anyone knows why when we use RIP or IGRP routing protocols and we have a
> default network command entered , we need to include ip classless?
>
> Any form of input will be greatly appreciated
>
>
> thanks
>
>
> Jason
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
